Communication cable used in jumper assemblies or short antenna feeder runs. Designed for indoors installations of
WLAN, GPS, Mobile antennas where an easyly routed low loss RF cable is needed.
Construction
Conductor
Copper coated Al wire
4.45 ± 0.04 [mm]
Dielectricum
Cellular PE
11.7 ± 0.25 [mm]
Screen
Al - polyester tape
Screen
Tinned Cu-braid
12.6 ± 0.25 [mm]
Jacket
Black
SHF1
O.D.
15.0 ± 0.4 [mm]
Weight
200 [kg/km]
Specifications
Operating temperature normal
-40 – +85 [°C]
Temperature @ installation
-20 – +60 [°C]
Screen resistance
3.9 [Ω/km]
Characteristic impedance
50 ± 2 [Ω]
Return Loss
> 14 [dB]
Conductor resistance
1.7 [Ω/km]
Tensile strength
170
[N]
Capacitance
76.6 [pF/m]
Velocity factor
0,87
Min. bending radius flexible
10 [x outer diam]
Min. bending radius installed
5 [x outer diam]
Norms
Halogenfree, max content corrosive and toxic gases
IEC 60754-1 & IEC 60754-2
Material properties, insulation and sheath
IEC 60092-360 (359)
Design and testing standards
IEC 60096-0-1 Ed 3
Flame resistance
IEC 60332-3-24 Cat.C
, IEC 60332-3-22 Cat.A
Smoke emission
IEC 61034-1 & IEC 61034-2
UV-resistant
UL 1581, ISO 4892
Certification
DNV
Part No.
1092359
Attenuation nominal, max 105%
| Frequency MHz | Attenuation dB/100m |
|---|---|
| 220 | 4.0 |
| 400 | 5.8 |
| 800 | 8.1 |
| 900 | 8.6 |
| 1800 | 12.7 |
| 1900 | 13.0 |
| 2000 | 13.4 |
| 2200 | 14.2 |
| 2500 | 14.9 |
| 5800 | 24.3 |
Structural return loss
| MHz | dB |
|---|---|
| 800 – 2500 | 14 |
Updated
| Date | Rev. | Description |
|---|---|---|
| 14.02.2018 | 1 | Norms |
| 26.04.2023 | 2 | DNV-Certificate |
